Program Volume" Function (Modification Of The Value Of A Stored Volume) - VWR SAS Super ISO Manuel D'instructions

Press ENTER to select the volume and the display will show the selected volume.
Press START to aspirate the selected volume of air.

"PROGRAM VOLUME" function (modification of the value of a stored volume)

Using this procedure, it is possible to memorise up to eight different volumes (from 1 to 1999 litres of air).
Switch the unit on by touching the screen for at least two seconds.
Press MENU and select the PROGRAM VOLUME function by pressing the "UP" or "DOWN" arrows.
Press ENTER to modify the volumes.
Select a volume by "^" pressing the "UP" or "DOWN" arrows and press ENTER.
08/31/06 11.31
1250 Lt. DELAY 00 MIN
START
MENU'
PROGRAM VOLUME
CLEAR
SELECT VOLUME
[ 1250 ] Litres
CLEAR
MODIFY RUN
[ 1250 ]
^
CLEAR
MENU
ENTER
ENTER
ENTER
13