Appliance Installation; Voltage Selection; Important - Napoleon NEFB33H Instructions D'installation Et D'opération

10

3.3.1 APPLIANCE INSTALLATION

A. Place a cloth (not supplied) onto the mantel (Fig. 1) to prevent the appliance from scratching the
EN mantel surface.
B. With two people, lift the appliance up and insert into the opening, leave space between the appliance
and fl oor base in order to not scratch the fl oor surface. Do not push or slide the bottom of the
appliance on the fl oor base (Fig. 1).
C.
Set the appliance down and into place and remove the cloth (Fig. 2).
Fig. 1
STEP 1: LIFT
APPLIANCE
LEAVE ABOUT
A 1/4" GAP
1/4"

3.3.2 VOLTAGE SELECTION

This appliance is able to use 120 volt or 240 volt power supply by setting the voltage selector switch (Fig. 1)
and hard wiring confi gurations. NOTE : the factory set up confi guration is 120 volt operation with cord
plug.
Fig.1
W415-2165 / E / 02.23.17
STEP 2: INSERT
!
DO NOT SLIDE APPLIANCE
CLOTH
IMPORTANT: Only a qualifi ed person
can change the voltage setting.
Fig. 2
STEP 3: SET APPLIANCE
!
APPLIANCE