Güde GBS 315 UG Traduction Du Mode D'emploi D'origine page 26

Inspections and Maintenance
Inspections and Maintenance Safety Instructions
CAUTION!
Disconnect the unit from the power source before getting
down to any work on it and wait for the saw band to stop
Inspections and Maintenance Schedule
Time interval Description
•
After every use
•
Every 6 months
•
Before every use
Clean the machine. Removal sawdust from the table and machine
Clean the metal parts carefully and apply acid-free oil.
Check the saw bend and driving belt tension.
and put the band upper guide down completely. Do not
work on the machine in operation.
The machine will serve as a sufficient aid only if maintained
and cared for appropriately. Insufficient maintenance and
care may result in accidents and injuries.
26
GB
Other
details if
necessary