Güde GBS 315 UG Traduction Du Mode D'emploi D'origine page 18

Other Hazards
Hazard
Breakage in operation
Thrown away articles and
splashes
Disposal
Disposal instructions are given by pictographs on the unit or
packaging. For meaning of individual symbols refer to chapter
"Symbols on Unit".
Operator Requirements
The operator should read the instruction manual carefully
before using the unit.
Qualification
No special qualification is required for use of the unit except
for detailed direction by a professional.
Technical Data
Supply connection
Motor output
Motor speed
Ø Saw band pulley
Speed
Table size
Max. headway
Max. stroke width
Table setting range
Saw band dimensions
Band teeth system
Ø exhaust
Base height
Total height
Acoustic output level
measured
guaranteed
Weight ca
Transportation and Storage
Assembly and Initial Operation
Structural Group 1
Fig. 3
Description
The band may break in
operation.
The band or mechanical
particles may wound your eyes
in the course of cutting job.
230 V~50 HZ
740 W
1400 min-1.
315 mm
370+800 m/min.
400 x 480 mm
155 mm
305 mm
0-45°
2240 x 12,7 x 0,50 mm
4 Zähne pro Zoll
100 mm
530 mm
1715 mm
L 81 dB
WA
L 101 dB
WA
73 kg
Protective Action
Always wear protection goggles
when working with the unit.
Always wear protection
goggles.
Minimum Age
Only persons above 16 years of age are allowed to work with
the unit. .
Exempted from the provision is the use of the juvenile
trainees if they work in the course of their professional
training with an aim to obtain the skill under a trainer
supervision.
Training
Use of the unit requires adequate lesson by a professional or
the use of the manual only. Special training is not required.
Delivery-contained
parts and accessories
Fig. 1 – Pos. 8/2x
Fig. 1 – Pos. 9/2x
Fig. 1 – Pos. 22/4x
Fig. 1 – Pos. 8/16 x
18
GB
Residual Hazards