GOLDONI STAR Manuel D'emploi Et Entretien page 87

Cab identification
To identify the cab, consult the metal data plate affixed inside on the rear cross-
member (N° 1 fig. 33). It lists the following information:
• Manufacturer
• Type
• Serial number (chassis number)
5.3.1 Heating and ventilating
The ventilation function is operated by means of the control (N° 1 fig. 31 and
32). Direct the air flow by positioning front vents N° 4 fig. 31 and 32 as required.
The air can be drawn from the outside or from inside the cab by means of vents
N° 2 fig. 31 and 32:
• vents closed: the air is drawn from the outside through the filter.
• vents open: most of the air is drawn from the inside through the vents
themselves.
The heating function is operated by means of control N° 3 fig. 31 and 32 (a
=open; c = closed). Vary the ventilation speed by means of control N° 1 fig. 31
and 32.
87