Operating Instructions; Cleaning And Maintenance - Sonnenkonig DUBLIN Mode D'emploi

3 Operating instructions

1. Plug into any 220 V AC, 50 Hz source.
GB
2. Place the heater on the floor at least 1 metre away from the wall and any other objects
such as furniture, curtains or plants.
3. Set the on/off switch to ON. The appliance is now on standby.
4. Press the + symbol to start the appliance. The appliance will start in cool fan mode
with the pilot light for the fan illuminated.
5. Press the + symbol again to increase the output power. The corresponding pilot light
will then illuminate. Once the room reaches a comfortable temperature, press the -
symbol to select a lower setting to reduce your electricity consumption and to prevent
the room from becoming too warm.
6. If you need to switch off the appliance, press the - symbol until all the pilot lights go out.
7. If the appliance will not be used for a long time, please set the on/off switch to OFF
8. The heater head can be manually adjusted to a comfortable position. The angle can be
adjusted by up to 50°. Do not touch the safety grill to avoid burns.
• Your heater is equipped with a safety device with a thermal cut-off that switches off the
heater in the event of overheating or malfunction. It will reset while the temperature
reduces to a normal level.
• If overheating or malfunctions continue, return the heater to an approved service agent
for examination.
• The most common cause of overheating is deposits of dust or fluff entering the heater.
Ensure these deposits are removed regularly by unplugging the unit and vacuuming the
air vents and front grill.

4 Cleaning and maintenance

• Light accumulations of dust can be removed from the heater with a soft cloth. Wipe the
exterior surfaces of the heater occasionally with a cloth moistened (not dripping wet)
in a solution of mild detergent and water. Dry the housing thoroughly with a soft dry
cloth before operating the heater.
• The fan motor is lubricated in the factory and will require no further lubrication.
• No other user maintenance is required or recommended. If servicing is required, send
your heater to the nearest authorised service centre.
30