Operating Instructions - Sonnenkonig SAHARA Notice D'utilisation

5 Operating instructions

1. Product installation
Step 1: Open the packing, take the product out and take off the poly-bag.
Step 2: Set the machine up, install base and fix screw on the smooth surface.
2. Operating instruction
Connect the power cord with correct power supply and turn on the power switch on the back
of the product.
3. Humidifier function
• Switch knob for start and increase humidifier function, down for the decrease humidifier
function and turn-off.
• Green indicator light: humidifier on.
• Red indicator light: short of water, humidifier stops. After adding water, it turns into green
light and restart.
• Heater and humidifier can work at the same time.
4. Power ON/OFF
By pressing the button A, the device start working. Press it again, device is turned off, digital
LCD display show shutdown function (10–>0).
Default settings during first start up:
• Low heating power.
• LED display show default temperature 25°C.
• Fan ON.
• Timer and swing OFF.
5. Temperature setting:
• By pressing the button C, enter in to temperature settings, the temperature indicator light
will be on, the LED light will flicker.
• Temperature range 5°C~ 35°C. Press the button D/E to set temperature.
• If the room temperature is higher the set temperature: Ceramic heater and fan are OFF.
• If the room temperature is lower the set temperature: Ceramic heater and fan are ON.
• When setting the time and temperature or when in "ECO" mode, the timing, the room tem-
perature or „ECO" are displayed in an interval of 30 seconds. When no timer is set, only the
set temperature is displayed.
• If no operation to the keys after 5 seconds, then the LED indicator will show the room tem-
perature.
55
GB