Operating Instructions - Sonnenkonig FRESCO 140 Mode D'emploi

Setting up the WLAN function on the air conditioner
Please proceed as follows to activate your device for WLAN remote control:

5. OPERATING INSTRUCTIONS

Before starting to operate the device
– Find a place where there is a power supply nearby.
– Install the exhaust hose as shown in Fig. 5 and Fig. 5 A and adjust the window position well.
Fig. 5
Connect the air conditioner to the power supply and ensure that the
device is not running.
Press and hold the SLEEP Button for about 5 Seconds or until a beep
tone appears. The Wifi Light should now be blinking rapidly.
The WLAN function of your device is now ready to connect.
Fig. 5 A
57
Fig. 6
EN