Using A Battery Harness; Stihl Ar L Backpack Battery; Positioning The Connecting Cord - Stihl BGA 200 Notice D'emploi

12 Using a Battery Harness

12 Using a Battery Harness

12.1 STIHL AR L Backpack Battery

12.1.1 Adjusting the Battery Harness to Suit the Operator's
Height
The battery harness can be set to positions S, M or L to suit
the operator's height.
1
► Depress the locking tab (1) and push it in the direction of
the arrow.
► Remove the slide (2).
2
4
► Line up mark (3) with mark (4).
► Insert the slide (2).
► Pull the slide up (opposite the direction of the arrow).
It will engage with a click.
0458-812-8221-A
2
2
3
► Adjust the slide at the left and right shoulder straps to the
same position.

12.1.2 Positioning the Connecting Cord

WARNING
To reduce the risk of injury from tripping on the connecting
cord or losing control of the power tool, always secure the
connecting cord with the hook and eye fasteners as
described below. Always position and secure the connecting
cord so that it will not interfere with the proper working
technique as described in the instruction manual for the
power tool you are using, or your ability to maintain control
of the power tool.
2
WARNING
Manage the cord to prevent it from contacting the
cutting/working attachment or catching on objects, which
could cause you to lose balance or control of the power tool,
resulting in serious personal injury and property damage.
The connecting cord can be secured in different positions
and adjusted to suit the height and reach of the operator.
1
2
2
2
The connecting cord can run through the guide (1) on the
shoulder strap (Illustration A), or along the back
plate (Illustration B). Secure the connecting cord to the
harness with the hook and eye fasteners (2). Always secure
the connecting cord using the guide or hook and eye
fasteners on the side of the body on which the power tool is
held and controlled. Do not allow the connecting cord to
swing across your body or hang at your side.
English
A
2
2
B
19