Stihl BGA 200 Notice D'emploi page 38

English
Always remove the connecting cord before carrying out any inspection, cleaning or maintenance.
Condition LEDs on
Battery
3 LEDs flash
red.
Blower cuts out 1 LED glows
during operation. red.
3 LEDs glow
red.
Runtime is too short.
36
Cause Remedy
Malfunction in ► Remove and reinsert the connecting cord, @ 14.
blower.
► Switch on the blower, @ 15.1.
► If the LEDs still flash, do not attempt to use.
The blower has a malfunction and must be checked by a
servicing dealer.
Battery too hot / too ► Remove the connecting cord, @ 14.2.
cold.
► Allow the blower and battery to cool down gradually at
Blower too hot.
ambient temperatures of about 50 °F to 68 °F (10 °C to
20 °C).
Battery not fully ► Charge the battery as described in its instruction manual.
charged.
Useful life of battery ► Have the battery checked by an authorized STIHL servicing
has been reached or dealer.
exceeded.
23 Troubleshooting Guide
0458-812-8221-A