Device Information; Operating Limits - Dimplex LI 15TE Instructions D'installation Et D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

LI 15TE

12 Device Information

1
Type and order code
2
Design
2.1
Model / controller
2.2
Thermal energy metering
2.3
Installation location / degree of protection according to EN 60 529
2.4
Antifreeze condensate tray / heating water
2.5
Performance levels
3

Operating limits

3.1
Heating water flow / return
3.2
Air (heat source)
4
Performance data / flow rate
4.1
Heating water flow rate / internal pressure differential
Minimum heating water flow
2
4.2
Heat output / COP
4.3
Sound power level of device /
outdoors according to EN 12102
4.4
Sound pressure level at a distance of 1m
4.5
Air flow
5
Dimensions; weight and filling quantities
5.1
Device dimensions without connections
5.2
Device connections for heating system
5.3
Weight of the transport unit(s) incl. packaging
5.4
Refrigerant; total filling weight
5.5
Lubricant; total filling quantity
6
Electrical connection
6.1
Supply voltage; fuse protection
6.2
Control voltage; fuse protection
6.3
Starting current with soft starter
6.4
Nominal power consumption at A2 / W35 / max. power consumption
Nominal current at A2/W35 / cos 
6.5
6.6
Max. power consumption of compressor protection
7
Complies with the European safety regulations
8
Additional model features
8.1
Type of defrosting
1. The heat circulating pump and the heat pump manager must always be ready for operation.
2. This data indicates the size and capacity of the system according to EN14511 (5 K at 7 °C). For an analysis of the economic and energy efficiency of the system, other parameters,
in particular the defrosting capacity, the bivalence point and the regulation, should also be taken into consideration.
The specified values have the following meaning, e.g. A7 / W35: External air temperature 7 °C and heating water flow temperature 35 °C.
3. In reduce mode, the heat output reduces by approx 8 % and the sound power by 2-3 dB(A).
4. The specified sound pressure levels correspond to the operating noise of the heat pump in heating operation with a flow temperature of 35 °C. The specified sound pressure level
represents the free sound area level. The measured value can deviate by up to 16 dB(A), depending on the installation location.
5. Please note that additional space is required for pipe connections, operation and maintenance.
6. See CE declaration of conformity
EN-12
°C
°C
A7 / W35/30
m³/h / Pa
A7 / W45/38
m³/h / Pa
A7 / W55/45
m³/h / Pa
at A-7 / W35
kW / ---
at A2 / W35
kW / ---
at A7 / W35
kW / ---
at A7 / W55
kW / ---
at A10 / W35
kW / ---
3
dB(A)
4
dB(A)
m³/h
5
H x W x L mm
Inch
kg
type / kg
type / litres
A
5
A / ---
W
452160.66.49 · FD 9302
up to 58 ± 2 / from 18
Pipe connection 1 1/4" flat sealing
Polyolester (POE) / 1.9
3~/N/PE 400 V (50 Hz) / C13 A
1~/N/PE 230 V (50 Hz) / C13 A
2
kW
70; thermostatically controlled
LI 15TE
Universal / internal
-
Indoors / IP 20
1
Heated / yes
1
-25 to +35
2.6 / 11800
1.8 / 5500
1.3 / 2500
EN 14511
9.6 / 2.8
12.0 /3.3
14.4 / 3.7
13.9 / 2.7
15.3 / 3.8
50 / 53
43
3700
1565 x 990 x 780
270
R404 A / 4.6
22
3.8 / 6.2
7.1 / 0.8
6
Reverse circulation
www.dimplex.de

Publicité

Chapitres

Table des Matières
loading

Table des Matières