Optional Installation; Receiver Location/Wiring - Napoleon WHD48N Mode D'emploi

29

6.0 OPTIONAL INSTALLATION

6.1

RECEIVER LOCATION/WIRING

EN
A. For wiring information see the "WIRING DIAGRAM" section.
Remote receiver can either be installed into the side of the appliance (see illustration below) or hard wired into
a wall within 8 feet of the appliance and must be accessible for programming the remote.
If installing into a wall, install the receiver into a standard electrical switch box. Determine an appropriate
location and install the electrical box.
NOTE: Ensure the 3 position slider switch is in the "REMOTE" position (middle).
W415-1606 / 09.09.16