CAMPAGNOLO CHAIN Mode D'emploi page 37

• Lock the link by means of the special
locking device (Z - Fig. 19).
• Check that the tapered tip of the
pusher is in line with the centre of the
bushing Ultra-link CN-RE500 (Fig. 20).
• Screw in the tool to bring the pusher
into contact with the protruding end of
the Ultra-link CN-RE500 bush, turning
it by about 3⁄4 of a turn and exerting
moderate force till distorted (Fig. 21).
Internal side
Lato esterno
of the chain
della catena
F
F
20
ENGLISH
Z
19
21
37