CAMPAGNOLO CHAIN Mode D'emploi page 34

• Clamp the link with the special clamping
device (Z - Fig. 11).
• Check that the tongue of tool UT-CN300 is
in the external position (Y - Fig. 11).
• Check that the tapered tip of the pusher
(F) (Fig. 12) is in line with the centre of the
bushing ULTRA-LINK CN-RE500 (E) (Fig. 12).
• While exerting a uniform force, screw in
the tool (Fig. 13) so that the bushing ULTRA-
LINK CN-RE500 (E) has completely entered
the thickness of the chain.
E
E
F
F
12
34
Lato esterno
External side
della catena.
of the chain
Y
Z
11
E
13
ENGLISH