CAMPAGNOLO CHAIN Mode D'emploi page 32

2.2 -
INSERTING THE BUSHING ULTRA-LINK CN-RE500
• Remove the plastic band and the adhesive
D
"Warning" label.
• To assembly the closing pin ULTRA-LINK
CN-RE500, place the chain on the bottom
bracket shell.
• Insert the inner link (B - Fig. 7) into the
B
C
outer link (C - Fig. 7), and then insert the
drive part of the union bushing ULTRA-LINK
CN-RE500 (D - Fig. 7) into the hole of the
External side of the chain
link from the inside of the chain towards
7
the outside.
• Move the chain on to the larger chainring
(keeping it on the smallest sprocket), then
position the links to be closed in the area
indicated in Figure 8.
8
32
ENGLISH