CAMPAGNOLO CHAIN Mode D'emploi page 35

Note
In order to minimize the possibility of
damaging the chain irreparably, DO NOT
TIGHTEN the tool beyond the beat. Let the
bushing ULTRA-LINK CN-RE500 (E) protru-
Internal side
of the chain
de 0.1 mm from the inner side of the chain
(Fig. 14).
• Insert the protruding part of the guide into
the hole provided at the base of the tool and
split it by bending (Fig. 15).
E E
The terminal part of the split guide must
0,1 mm
always remain inside the bushing.
• Remove the clamping device and remove
14
the chain from the tool.
15
35
ENGLISH