Ryobi RBS904 Mode D'emploi page 14

EN
FR DE ES IT NL
Work-light power
Net weight
Measured values determined according to EN61029
A-weighted sound pressure
level
Uncertainty K
Measured values determined according to EN61029
A-weighted sound power
level
Uncertainty K
Replacement parts
Band saw blade 6TPI
Band saw blade 14TPI
Know your BanD saw
See Figure 1.
The safe use of this product requires an understanding of
the information on the tool and in this operator's manual
as well as a knowledge of the project you are attempting.
Before use of this product, familiarize yourself with all
operating features and safety rules.
anGlE aDJustMEnt KnoB
Tilts the saw table for bevel cutting.
BlaDE GuarD
Protects the operator from coming in contact with the
blade.
BlaDE GuiDE aDJustMEnt KnoB
Use the blade guide adjustment knob to adjust the blade
guide assembly up and down, and to keep the blade
from twisting or breaking. Always lock the blade guide
assembly in place before turning on the band saw.
BlaDE GuiDEs
Upper and lower blade guides helps keep the blade from
twisting during operation.
Dust ExHaust port
A 53 mm (2-1/8") dust exhaust port makes dustless cutting
possible. Attach a dust bag (not included) or a shop vac to
the dust exhaust port.
coVEr locKinG scrEw
Allows front cover to be opened for making adjustments.
PT DA SV FI NO RU
English
15 W, 230 V
19.6 kg
L = 84.0 dB(A)
p
3 dB(A)
L = 89.5 dB(A)
W
3 dB(A)
5132003123
5132003114
PL CS HU RO LV LT
MitrE GauGE
This gauge aligns the wood for a crosscut. The easy-to-
read indicator shows the exact angle for a mitre cut at 15°,
30°, 45° and 60°.
rapiDsEt™ BlaDE tEnsion lEVEr
Controls blade tension when changing blades and making
adjustments for various sawing applications.
saw BlaDE
Saw comes with a standard 6.35 mm (1/4") blade.
saw taBlE witH tHroat platE
Your band saw has a saw table with tilt control. The throat
plate, installed in the saw table at the factory, allows for
blade clearance.
scalE anD scalE inDicator
The scale and scale indicator show the angle or degree
the saw table is tilted for bevel cutting.
taBlE locK lEVEr
Loosening the table lock lever allows the saw table to be
tilted at different angles. Tightening the table lock lever
locks the saw table in place.
tracKinG KnoB
Adjusts tracking to keep blade centred on the wheels.
tracKinG ViEw winDow
The tracking view window makes tracking adjustments
easier to see.
pusH sticK
Always use the push stick to feed the workpiece until it is
clear of the table.
loosE part list
Description
Washers
Table lock lever
Hex key, 3 mm
Hex key, 4 mm
Hex key, 5 mm
Mitre gauge
Acorn nuts
Feet
5
ET HR SL SK EL TR
Quantity
7
1
1
1
1
1
4
4
UK