Troubleshooting; Warranty - Dometic SKYSOL POWERED ROOFBLIND Instructions De Montage

Troubleshooting

Cleaning windows
➤ Always ensure your blinds are fully stowed before cleaning windows. This will
prevent spoiling the blind fabric by splatter or sprays of water or detergent.
Panels can be unclipped and removed for fabric cleaning (fig. f, page 11 to
fig. g, page 11).
10 Troubleshooting
Fault
Moving rail not straight.
Panel not fully deploying.
Motor not working.
Motor running slow or fast.
AP Remote control (optional) not operat-
ing.
11

Warranty

The statutory warranty period applies. If the product is defective, please contact
the manufacturer's branch in your country or your retailer. You can find your
authorised customer service centre at dometic.com.
For repair and warranty processing, please include the following information
when you return the product:
• The number on the product label in the head rail.
• A reason for the claim or description of the fault.
If it is not possible to return the product, please provide photographs or video
identifying the defect.
28
Powered Roofblind
Solution
➤ Disconnect the first fabric panel at the
opposite end to the crooked moving
rail (fig. f, page 11 to fig. g,
page 11).
➤ Adjust the coupling (fig. 0, page 8).
➤ Disconnect the panel behind the non-
working panel to expose the cords
fig. f
fig. g, page 11).
to
( , page 11
➤ Check for any cord that maybe caught
or crossed and re-connect (fig. b,
page 9).
➤ Check if wiring for voltage to the motor
is correct.
➤ If power supply is checked and the
motor is still faulty contact your
distributor.
➤ If using the AP Remote control refer to
the AP Remote control manual.
➤ Check for correct supply voltage.
➤ Refer to the AP Remote control manual.
EN