Using The Roller Blind; Troubleshooting - Dometic RV BLINDS DB 3H Instructions De Montage Et De Service

DB3H, DB3Y
Tensioning the blackout pleated blind
➤ Tension the blackout pleated blind as follows:
– to a certain extent by tensioning the cords (fig. b 1, page 7) with springs
(fig. b 2, page 7), that are located on the right and left of the cassette
or
– at the endpiece of the guide rail (fig. 2, page 2 and fig. 3, page 3)
4

Using the roller blind

4.1 Closing the roller blind
A
NOTICE! Risk of damage due to a build-up of heat between the
roller blind and the window!
In strong sunlight, only close the blackout roller blind two thirds of the
way.
➤ Pull the blackout roller blind and the insect screen by the handle strip to the
desired position.
✓ When the tension has been set correctly the roller blinds stay in the closed
position.
4.2 Opening the roller blind
A
NOTICE! Risk of damage
Never let the blackout roller blind spring back.
➤ Pull the blackout roller blind and the insect screen by the handle strip to the
desired, open position.
✓ The handle strips of the roller blinds hold firm in every position.
5

Troubleshooting

The insect screen or blackout roller blind cannot be moved.
➤ Check the guide rails for dirt.
➤ Clean the guide rails if necessary.
EN
Using the roller blind
11