General Information - Hilti TE 6-S Mode D'emploi

ORIGINAL OPERATING INSTRUCTIONS
TE 6-S rotary hammer drill
It is essential that the operating
instructions are read before the
tool is operated for the first time.
Always keep these operating
instructions together with the tool.
Ensure that the operating instruc-
tions are with the tool when it is
given to other persons.
Operating controls and components
Chuck
Function selection switch
On/off switch
Forwards/reverse switch
Side handle with depth gauge
Connection for the dust removal module
Supply cord
Contents

1. General information

2. Description
3. Insert tools and accessories
4. Technical data
5. Safety rules
6. Before use
7. Operation
8. Care and maintenance
9. Troubleshooting
10. Disposal
11. Manufacturer's warranty - tools
12. EC declaration of conformity
Printed: 07.07.2013 | Doc-Nr: PUB / 5071105 / 000 / 00
1. General information
1.1 Indication of danger
-CAUTION-
This word is used to draw attention to a potentially dan-
gerous situation which could lead to minor personal injury
or damage to the equipment or other property.
1.2 Pictograms
Warning signs
General
warning
Obligation signs
Wear eye Wear breathing
protection
Symbols
Read the Return waste
operating
instructions
before use
These numbers refer to the corresponding illustra-
tions. The illustrations can be found on the fold-out cov-
Page
er pages. Keep these pages open while studying the oper-
13
ating instructions.
14
In these operating instructions, the designation "the tool"
14 always refers to the TE 6-S rotary hammer drill.
16
Location of identification data on the tool
17
The type designation and serial number can be found on
19
the type plate on the tool. Make a note of this data in your
19
operating instructions and always refer to it when mak-
21
ing an enquiry to your Hilti representative or service
21
department.
22
22
Type:
22
Warning: Warning:
electricity hot surface
Wear ear
protection protection
material for
recycling
Serial no.:
en
Wear protective
gloves
13