Technical Documentation Attached; Declaration Of Conformity - EBARA Ego B/40 Serie Mode D'emploi

13. TECHNICAL DOCUMENTATION ATTACHED

Installation diagram.
14. TROUBLESHOOTING
DESCRIPTION OF THE
ERROR
INDICATOR LIGHT IS OFF, PUMP
IS NOT WORKING
INDICATOR LIGHT IS
PERMANENTLY ON
INDICATOR LIGHT CHANGES
COLOUR
NOISES COMING FROM
THE PUMP/THE HYDRAULIC
SYSTEM
FLOW RATE TOO LOW

15. DECLARATION OF CONFORMITY

The company EBARA PUMPS EUROPE S.p.A. declares under its own responsibility
that its Ego products are in conformity:
2006/42/EC (MD), 2004/108/EC (EMC),
2006/95/EC (LVD), EN 809,
EN 60 335-1, EN 60 335-2-51,
EN 61000-6-3, EN 61000-6-1
EN 55014-1; EN 55014-2
EN 16297-1:2012; EN 16297-2:2012
Ecodesign directive (2009/125/EC)
POSSIBLE CAUSES
No voltage applied
The unregulated mode may have
been selected
The pump is blocked
The pump or the system are not
properly vented
The selected setting is too low
EBARA Pumps Europe S.p.A.
Via Pacinotti, 32 - 36040 Brendola (Vicenza) - Italy
Tel. +39 0444 706811 - Fax +39 0444 405811
www.ebaraeurope.com
PROPOSED SOLUTION
Check electric installation and
fuses
Select regulated mode
Clean the pump
Vent the hydraulic system
Select a higher curve
Mr. SHU NAGATA
Managing Director
Date: Jan. 30, 2013
GB
17