Table Des Matières; General Safety Warnings And Precautions; Installation Warnings; Product Description - Nice MC424 Instructions Et Avertissements Pour L'installation Et L'utilisation

ENGLISH
Original instructions
Summary
GENERAL SAFETY WARNINGS AND PRECAUTIONS . . . . . . . . . . 1
1 - PRODUCT DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
2 - INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
2.1 - PRELIMINARY CHECKS FOR INSTALLATION . . . . . . . . . . . . 2
2.2 - PRODUCT APPLICATION LIMITS . . . . . . . . . . . . . . . . . . . . . . 2
2.3 - INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
2.4 - ELECTRICAL CONNECTIONS . . . . . . . . . . . . . . . . . . . . . . . . . 2
2.4.1 - Notes on connections . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2.4.2 - Type of ALT input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2.4.3 - Examples of photocell connections: with the
"Everything in stand by" function active and the
Phototest function disabled . . . . . . . . . . . . . . . . . . . . . 3
2.4.4 - Examples of photocell connections: with the Phototest
function active and the "Everything in stand by"
function disabled . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2.5 - INITIAL START-UP AND ELECTRICAL CONNECTIONS . . . . 3
2.6 - AUTOMATIC LIMIT SWITCH SEARCH . . . . . . . . . . . . . . . . . . 3
3 - TESTING AND COMMISSIONING . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
3.1 - TESTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
3.2 - COMMISSIONING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
4 - DIAGNOSTICS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
5 - PROGRAMMING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
5.1 - PRESET FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
5.2 - PROGRAMMABLE FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . 4
5.2.1 - Direct programming . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
5.2.2 - First level programming: first part . . . . . . . . . . . . . . . . 4
5.2.3 - First level programming: second part . . . . . . . . . . . . . 5
5.2.4 - Second level functions . . . . . . . . . . . . . . . . . . . . . . . . . 5
5.3 - PROGRAMMING MODES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
5.3.1 - First level programming: functions . . . . . . . . . . . . . . . 6
5.3.2 - Second level programming: parameters . . . . . . . . . . . 6
5.3.3 - Deletion of memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
5.3.4 - Example of first level programming . . . . . . . . . . . . . . 7
5.3.5 - Example of second level programming . . . . . . . . . . . . 7
5.3.6 - Programming diagrame . . . . . . . . . . . . . . . . . . . . . . . . 8
6 - FURTHER DETAILS: accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
6.1 - CONNECTING A RADIO RECEIVER . . . . . . . . . . . . . . . . . . . . 9
6.2 - CONNECTING MODEL PS124 BUFFER BATTERY . . . . . . . . 9
6.3 - CONNECTING THE SOLEMYO SYSTEM . . . . . . . . . . . . . . . . 9
7 - TROUBLESHOOTING (troubleshooting guide) . . . . . . . . . . . . . . . . 9
8 - PRODUCT MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
DISPOSAL OF THE PRODUCT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
TECHNICAL CHARACTERISTICS OF THE PRODUCT . . . . . . . . . 10
EC DECLARATION OF CONFORMITY . . . . . . . . . . . . . . . . . . . . . . 10
RADIO RECEIVER: SMXI - SMXIS . . . . . . . . . . . . . . . . . . . . . . . . . 11

1 - PRODUCT DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

2 - AERIAL INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
3 - MEMORISING A REMOTE CONTROL . . . . . . . . . . . . . . . . . . . 11
4 - DELETING ALL TRANSMITTERS . . . . . . . . . . . . . . . . . . . . . . . 12
TECHNICAL CHARACTERISTICS OF THE PRODUCT . . . . . . . . . 12
IMAGES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I - V

GENERAL SAFETY WARNINGS AND PRECAUTIONS

Safety warnings
• IMPORTANT! - This manual contains important instructions and warn-
ings for personal safety. Incorrect installation could cause serious physical
injury. Read all parts of the manual carefully before starting work. If in doubt,
interrupt installation and contact the Nice Service Centre for clarifications.
• IMPORTANT! - Important instructions: keep this manual in a safe place
to enable future product maintenance and disposal procedures.

Installation warnings

• Before commencing installation, check that the product is suitable for the
intended kind of use (see paragraph 2.2 "Limits of use" and chapter "Product
technical specifications"). If not suitable, do NOT proceed with installation.
• During installation, handle the product with care, avoiding the risk of crush-
ing, impact, dropping or contact with any type of liquid. Never place the
product near sources of heat or expose to naked flames. This may damage
product com p onents and cause malfunctions, fire or hazardous situations. If
this oc curs, suspend installation immediately and contact the Nice Service
Centre.
• Never make modifications to any part of the product. Operations other than
as specified can only cause malfunctions. The manufacturer declines all liabil-
ity for damage caused by makeshift modifications to the product.
• The product should not be used by children or people with impaired physical,
sensorial or mental capacities or who have not received adequate training in
the safe use of the product.
• On the power line to the system, install a device for disconnection from the
power mains with a gap between contacts that assures complete disconnec-
tion in the conditions of overvoltage category III.
• Connect the control unit to an electric power line equipped with an earthing
system.
• The product's packaging materials must be disposed of in full compliance
with local regulations.
1
PRODUCT DESCRIPTION
The MC424 control unit has been designed to control Wingo 24 V electrome-
chanical actuators, for automated swing gates or doors. IMPORTANT! - Any
uses other than those specified herein or in environmental conditions
other than as stated in this manual are to be considered improper and
are strictly prohibited!
The MC424 control unit operates on the basis of a current sensitivity system
which checks the load of the motors connected to it. The system automatically
detects travel stops, memorises the running time of each motor and recognises
obstacles during normal movement. This feature makes installation easier as
there is no need to adjust the working times nor the leaf delay.
The control unit is pre-programmed for the normal functions, while more spe-
cific functions can be chosen following a simple procedure (see chapter 5).
The control unit is designed to be powered by PS124 buffer batteries as emer-
gency power supply in the event of a mains power failure (for further information
see chapter 6.2). It is also designed to be connected to the "Solemyo" solar
energy system (for further information see chapter 6.3).
2

INSTALLATION

In order to explain certain terms and aspects of an automatic 2-leaf swing door
or gate system refer to the typical system shown in fig 1.
Key to fig. 1:
1. Wingo 24 V electromechanical actuator
2. Electromechanical actuator
3. Lucy24 flashing light
4. Key-operated selector switch
5. "PHOTO" pair of photocells
6. "FOTO1" pair of photocells
7. "PHOTO2" pair of photocells
8. Control unit
In particular, please note that:
• Refer to the product instructions for the characteristics and connection of the
photocells.
• Activation of the "PHOTO" pair of photocells have no effect on the gate dur-
ing opening, while they reverse movement during closing.
English - 1