Promax PROLITE-67 Manuel page 99

USER'S MANUAL PROLITE-67
1.- Menu Bar
There are the menus of the program (See section 6.3).
2.- Language in use
It shows the flag identifying the selected language.
3.- Active function selection tab
There are five tabs corresponding to each one of the five functions that are
available at the program. They are: Attenuation Test, Optical Loss Test Set,
Optical Power Meter, xPON Power Meter, xPON Losses Meter. When clicking
on one of these tabs, you access a window where you can view the loggers
function.
4.- Connection Status
It shows data corresponding to the model, serial number and firmware. Only
when the connection is succesful (see figure below):
If the connection fails you see next figure:
5.- Active Function.
It shows the name of the selected function.
6.- Logger Display Window.
It appears data loggers that have been selected at the Logger Selection
Window.
7.- Logger Options.
It shows all the options you can do with loggers. To perform any of this
options you have just to click on it. They are:
Receive loggers from the
equipment:
07-2012
Figure 26.- Connection enabled.
Figure 27.- Connection disabled.
It transfers the selected loggers at the
active function from the instrument to
the computer.
Page 37