Instructions For Using The Control Software; Start - Promax PROLITE-67 Manuel

USER'S MANUAL PROLITE-67
6 INSTRUCTIONS
SOFTWARE
6.1

Start

Follow next steps in order to start using the PROLITE-67 Control Software:
1. Check the PROLITE-67 is ON.
2. Check connection between PROLITE-67 and computer.
3. Run the program by double clicking on the icon PROLITE-67 which is located
on the desktop.
4. The main window appears (see figure below).
Figure 24.- PROLITE-67 Control Software Main Window.
The main window consists of a menu bar at the top. At the right side of the
bar there is a flag symbolizing the language in use.
Below de menu bar appears the "Logger" window with 5 tabs corresponding
to each one of the available functions in the instrument. This window shows
logger data you want to watch.
07-2012
FOR USING THE CONTROL
Page 35