Promax PROLITE-67 Manuel page 85

USER'S MANUAL PROLITE-67
Downstream Signal 1 (1490 nm)
[5] Downstream Wavelength signal.
[6] Absolute Optical power for the Downstream signal. Absolute Measurement
mode represents the absolute value of the signal power in dBm (dB referred
to 1 mW).
[7] Group selected threshold (identification code). The sign next to the code
indicating whether the power value is within ( ) is higher ( ) or below ( )
about the group threshold.
[8] Graphical representation of the power of the Downstream. The arrows
indicate the upper and lower threshold values in the group threshold.
Downstream Signal 2 (1550 nm)
[9] Downstream Wavelength signal.
[10] Absolute Optical power for the Downstream signal. Absolute Measurement
mode represents the absolute value of the signal power in dBm (dB referred
to 1 mW).
[11] Graphical representation of the power of the Downstream. The arrows
indicate the upper and lower threshold values in the group threshold.
[12] Group selected threshold (identification code). The sign next to the code
indicating whether the power value is within ( ) is higher ( ) or below ( )
about the group threshold.
LEDs
[13] The ONT led indicates the status of the ONT signal with respect to the
threshold values. Three indicator lights colours are possible and each colour
represents status signal with respect to threshold values: GREEN (PASS),
AMBER (HIGH) and RED (LOW).
[14] The OLT led indicates the status of the OLT signal with respect to the
threshold values. Three indicator lights colours are possible and each colour
represents status signal with respect to threshold values: GREEN (PASS),
AMBER (HIGH) and RED (LOW).
To navigate through the editable fields on the screen press SEL
selected field changes to shaded.
To edit a wavelenght or a threshold group of values, select it and press
[5].
To make or consult a logger refer to the section LOGGER Function.
07-2012
[4]. The
or
Page 23