Promax PROLITE-67 Manuel page 87

USER'S MANUAL PROLITE-67
Next are described each one of these fields on the screen:
[1] Row with all measures corresponding to each wavelength.
[2] Upstream Wavelength signal. Selectable by the user. For GPON networks is
1310 nm. For RFoG networks is 1610 nm.
[3] Reference value from which is calculated the relative losses of the signal.
Reference value is captured.
[4] Relative losses for the Upstream signal.
[5] Reference value from which is calculated the relative losses of the signal.
Reference value is captured.
[6] Relative power losses for the Downstream signal.
[7] This arrow indicates that the value is bigger than the scale on the graph.
[8] Graphical representation of the power losses signals.
LEDs
[9] The ONT led indicates the status of the ONT signal with respect to the
attenuation threshold value. Three indicator lights colours are possible and
each colour represents status signal with respect to threshold values: GREEN
(PASS), AMBER (HIGH) and RED (LOW).
[10] The OLT led indicates the status of the OLT signal with respect to the
attenuation threshold value. Three indicator lights colours are possible and
each colour represents status signal with respect to threshold values: GREEN
(PASS), AMBER (HIGH) and RED (LOW).
To navigate through the editable fields on the screen press SEL
selected field changes to shaded.
To change a wavelenght, select it and press
To capture a new reference value, select the current reference value and press
both keys and
To make or consult a logger refer to the section LOGGER Function.
07-2012
[5] simultenously.
or [5].
[4]. The
Page 25