System Connection - Beeper RE01AV/4 Manuel D'installation

4. SYSTEM CONNECTION

NOTE
You can only connect the cable B directly
to cable or cable if the length of your
C D
vehicle does not require an extension of 300
cm
A
Main unit with integrated buzzer
Switch ON/OFF
I
O
80 cm
BLUE
• +12V Brake
RED
• +12V After ignition
BLACK• Ground
B
80 cm
30 cm
WARNING • VEHICLES NOT ALLOWING AN EXTRA POWER CONSUMPTION ON REVERSE LIGHT
On some vehicles, the +12 V Reversing light is noisy when the engine is running that may interfere with proper operation of the
parking sensors or reversing camera kit.
In other cases, +12 V Reversing light allows no additional power consumer.
For these vehicles, BEEPER has developed the RCANR2 module to retrieve information +12V Reversing light from the CANBUS network.
This module connects to the CANBUS compatible carrier and can deliver a +12 V Reversing light for connecting a parking sensor or a
backup camera
Ref : RCANR2, more info & list of compatible cars, please follow the link : http://www.beeper.fr/radar-camera-de-recul/rcanr2.php
C
300 cm 300 cm
15 2
E
D
Diameter
22 mm
Ø
20 cm