System Connection; Installation - Beeper MP-250HUD-B Manuel D'installation Et D'utilisation

3. SYSTEM CONNECTION

MENU SET
HEAD UP DISPLAY

4. INSTALLATION

Please start the vehicle to get a signal and set the HUD HUD's ideal location on the dashboard
giving the best projection of the LED display on the windshield (see diagram below cons).
The sticker support the HUD has an adjustable foot which allows the set to your liking.
We advise you to test the site, this facility is essential for proper use of the product.
200 cm
CIGARETTE LIGHTER POWER
16
Adding reflective sticker: If multiple reflection is on windshields
athermal or if the reflection is of poor quality, then we urge you to use
the reflective sticker that will show through in normal condition and
visualize perfectly the HUD display. This sticker must pose as a film glass.
Plan liquid soap diluted to the desired location, peel the sticker from its
proper protection and paste in out air bubbles. There should be no air
bubbles or fingerprints to allow easy reading and ensure good aesthetics.