System Connection - Beeper CC1 Manuel D'installation Et D'utilisation

SYSTEM CONNEXION
BLACK WIRE : GROUND
1,5 m
RED WIRE: + 12V. REVERSE LIGHT
M
V1/V2
1,5 m
B
EXTENSION CABLE
WARNING • VEHICLES NOT ALLOWING AN EXTRA POWER CONSUMPTION
On some vehicles, the +12 V Reversing light is noisy when the engine is running that may interfere with proper operation of
the parking sensors or reversing camera kit.
In other cases, +12 V Reversing light allows no additional power consumer.
For these vehicles, BEEPER has developed the RCANR2 module to retrieve information +12V Reversing light from the CANBUS
network. This module connects to the CANBUS compatible carrier and can deliver a +12 V Reversing light for connecting a
parking sensor or a backup camera
Ref : RCANR2, more info & list of compatible cars, please follow the link : http://www.beeper.fr/radar-camera-de-
recul/rcanr2.php
A
7" SCREEN MONITOR
12 m
30 cm
18
ON REVERSE LIGHT
C
CAMERA