Beeper RE01AV/4 Manuel D'installation page 17

5. SENSORS INSTALLATION
The positioning of the sensors on the
bumper is essential for the proper
functioning of the reversing radar. Never
drill without being sure of the position of
the sensor.
The four sensors must be positioned on the split bumper. The height should be
50 to 70 cm, the gap between the sensor end should be 16 to 22 cm from the
edge of the bumper, the space between two sensors has varied between 30 and
60 cm.
16 to 22 cm
A
17 2
30 to 60 cm
B C D
16 to 22 cm
50 to 70 cm