Staufenbiel EPSILON COMPETITION V3 Instructions De Montage page 21

EN
Slide the carbon elevator connectors into the
09
designated holes in the tail.
10
Bring the elevator rocker arm lever to neutral
position, which is 0° angle. Create a linkage
connection like shown in the picture. Insert the
pushrod into the fuselage from the back. Bring
the elevator exactly into neutral position again.
11
Make a mark where the pushrod meets the ser-
vo horn.
12 Use a Z-bend plier to bend the pushrod exactly
at the marked postion. Mount the pushrod to
the servo horn like shown in the picture.
21