Staufenbiel EPSILON COMPETITION V3 Instructions De Montage page 19

01
02
03
04
THE FUSELAGE
ARF VERSION ONLY
Bring the servo for rudder and elevator into
middle positon with a servo tester and mount
the servo horns. Screw the servos to the servo
tray.
ARF VERSION ONLY
Create two cable beams with MPX-plug for aile-
ron and flap. Glue the MPX-plug to the fuselage
in the designated hole. Glue the wing lock bus-
hing to the fuselage as well.
Put the three CA-hinges into the slots of the
vertical stabilizer and glue them with thin CA. A
needle can help when applying the CA.
Mount the rudder, adjust it thoroughly and ap-
ply some drops of CA to mount it permanently.
EN
19