Publicité
Les langues disponibles
Les langues disponibles
Mounting Instructions for Hella Reversing Lamp
Installation must take place
in accordance with ECE R48.
Protection IP 54 K
1. Regulations
The Hella reversing lamp
should be mounted at the rear
end of the vehicle. Should two
12
reversing lamps be mounted,
these must be fitted
symmetrically to the median
longitudinal plane of the vehicle.
2. Alignment of the Reversing
Lamp
The reversing lamp is to be set
in such a way that the roadway
is illuminated to a distance of
not more than 10 m (32.8 ft)
behind the vehicle. Make sure
that the word "TOP" on the lens
is at the top of the lens when
the reversing lamp is fitted.
3. Electrical connection
A. Activation takes place
via a switch, e.g. on the
transmission
B. Activation takes place via
connection to a reverse light
already present on the
vehicle.
4. Testing
Switch on ignition or start
engine. When reverse gear is
engaged, or when the car is
being reversed, the reversing
lamp should be on.
This light
complies with the
European
agreement on the
international
transportation of
hazardous goods
by road (ADR).
Publicité
