Pa : 3,0 Db(A), Kwa : 3,0 Db(A); L Pa : 93,7 Db(A), L; K Pa : 3,0 Db(A), K; Scope Of Delivery - Meister SB1010M Mode D'emploi

GB
Operating instructions & safety hints
WARNING! To reduce the risk of injury, please read the operating instruc-
tions through carefully before using the device, and then store with the
machine! When passing the device on to another user, these operating inst-
ructions must also be included!
Contents
1 - Scope of delivery
2 - Technical information
3 - Components
4 - Correct use
5 - General safety
instructions
6 - Safety instructions
relating specifically to
the equipment

1 - Scope of delivery

• 1 Impact Drill
• 1 Additional Handle
• 1 Depth Gauge
• Operating Instructions
• Guarantee

2 - Technical information

Technical data
Power supply
Power input
Speed
Retaining collar
Spindle threated
Ø
Drilling capacity
- in concrete
- in steel
- in wood
Cable
Technical changes reserved.
36
5402270-Schlagbohrmaschine_man.indd 36 5402270-Schlagbohrmaschine_man.indd 36
Page
36
36
37
37
38
41
230-240 V~/50 Hz
1010 W
n : 0-2700 min
-1
0
: 0-44800 min
-1
43 mm
⁄ " x 20 UNF
1
2
max. 13 mm
16 mm
13 mm
35 mm
200 cm
7 - Installation and setting
8 - Operation
9 - Mode of operation
10 - Maintenance and
environmental
protection
11 - Service instructions
Noise emission/vibration
Noise emission
L : 93,7 dB(A), L : 104,7 dB(A)
pA WA
Measuring inaccuracy:
K : 3,0 dB(A), K : 3,0 dB(A)
pA WA
Hand/arm vibrations
Hammer drilling in cement
a : 20.751 m/s
2
h, ID
Measuring inaccuracy: K: 1,5 m/s
Drilling in metal a : 5.293 m/s
h, D
Measuring inaccuracy: K: 1,5 m/s
Noise/vibration information
Measuring values determined in accord-
ance with EN 62841.
WARNING! The specified overall
vibration values and noise emission
values were measured in accordance
with a standardised test procedure and
can be used in order to compare one
power tool with another.
The specified overall vibration values
and specified noise emission values can
Page
42
43
44
44
45
2
2
2
13.08.20 06:45 13.08.20 06:45