Best Cutting Practice; Cleaning And Maintenance; Cleaning; Replacing The Trimming Assembly - Grizzly ERT 450/8 Traduction De La Notice D'utilisation Originale

UK

Best cutting practice

WARNING. Danger of injury!
- Before starting the trimmer
check that the cutting head
will not come into contact with
stones, rubble or other foreign
bodies.
- Switch on the trimmer before you
approach the grass that is to be
cut
- Do not cut moist or wet grass.
- Do not overload the trimmer dur-
ing operation.
- Avoid contacting solid obstacles
(stones, walls, fences, etc.) since
this would make the string wear
out too quickly. Use the edge of
the protective cover to keep the
appliance away from such obsta-
cles.
- Always trail the extension cable
behind you. Do not pass the op-
erating trimmer over the exten-
sion cable as the cable could be
damaged.
Long grass should be cut at layers from
top to bottom. Use the edge of the protec-
tive cover or the spacer bow to maintain
the correct distance.
120
Cut the grass
by swaying the
trimmer side-
ways to the
right and left.
Cut slowly, tip-
ping the appli-
ance fowards
by about 30°.
Cleaning and
maintenance
Always disconnect the plug from
the mains socket before working
on the trimmer.
Any work that is not described
in these Instructions must be
carried out by a servicing agen-
cy authorized by us. Only use
original parts and be very care-
ful with the line cutter during in-
stallation work. Danger of injury!

Cleaning

Do not jet water onto the trimmer
and do not clean it under flowing
water. This would result in the
danger of an electric shock and
the trimmer could be damaged.
Always keep the trimmer clean. Do no
use cleaning agents and solvents.
• After the work has been completed
remove all grass and soil from the cut-
ting device and the protective cover.
• Ensure that the ventilation slots are
always clean and free of grass.
• Clean the trimmer with a soft brush or
a cloth.
Replacing the trimming
assembly
Never manipulate the cutting de-
vice by inserting worn out original
or alien parts. Only use original
spare parts. Never use metal lines.
The use of alien parts can result in
serious personal injury and cause
irreparable damage to the trimmer
and the guarantee will become
instantly null and void.