Setting The Time - Medion LIFE P64077 Mode D'emploi

Setting the time

The time is automatically set when using RDS reception and does not need
to be set manually. A manually set time will be reset when using RDS
reception. However, the 12/24 hour setting will remain unchanged.
To display the time during operation, press the IPOD/MEM/C.-ADJ. button
for approx. 2 seconds.
How to set the time manually:

Switch the device to standby mode.
 Press the IPOD/MEM/C-ADJ. button on the device. Use the

buttons to choose between 24 and 12 hour display (24 HOUR
or 12 HOUR).
If you select 12 hour display, "AM" or "PM"
will appear before the hour display:
AM: the hours from 00:00 to 11:59;
PM: the hours from 12:00 to 23:59.
 Press the IPOD/MEM/C.-ADJ. button again.
The hour display flashes. Press the

to enter the hour.
 Press the button IPOD/MEM/C-ADJ. The minute display will flash.

Press the or
 Press the IPOD/MEM/C.-ADJ. button again. The time is now set and
the figures will have stopped flashing.

buttons within 6 seconds to enter the minutes.
 
or buttons within 6 seconds
EN
DE
FR
IT
NL
DK
NO

or
SE
19