9. Sound
9.1. Volume/mute
To adjust the volume, use the and + buttons on the remote control or the
controller on the device.
Press
to mute the sound.
X
to cancel the mute setting.
9.2. Equalizer
Press one of the equaliser buttons POP, ROCK, JAZZ, CLASSIC, FLAT to select one
of the various sound presets. The selected setting is then shown on the display.
If FLAT is selected, the equaliser is switched off and the sound is played back un-
changed.
9.3. Bass
Press the BASS button to switch on the bass amplification.
on the display.
Press the button again to switch off bass amplification.
the display.
10. Clock and timer
10.3.1. Displaying the time
The time can be displayed both when the device is switched on and when it is in
standby mode.
When the device is switched on, press the SET CLOCK button. The time is dis-
played for several seconds.
10.3.2. Setting the time
The time is set automatically using the radio reception signal. You can also set it
manually:
Switch the device to standby mode, and hold down the SET CLOCK button.
The hour display flashes. Press or to set the hours.
Press the SET CLOCK button to confirm.
The minute display flashes. Press the or buttons to set the minutes.
Press the CLOCK/SET button to confirm the setting.
The time is now set.
flashes in the display. Press the button again
MUTE
disappears from the display.
MUTE
is shown
BASS ON
is shown on
BASS OFF
DE
EN
FR
ES
IT
NL
59