Changing The Battery; Set-Up And Connections; Setting Up The Device; Attaching The Stand - Medion LIFE P64077 Mode D'emploi

Changing the battery

The remote control works with one 3 V button battery, type CR2032.
WARNING!
Risk of explosion if batteries are replaced incorrectly.
Replace batteries only with the same or equivalent type.
Press the latch and pull out the battery

compartment.
Remove the old battery and take it to a used

battery collection point for proper disposal.
Insert a fresh CR 2032 battery into the battery

compartment with the positive pole facing up.
Ensure the +/− terminals are correct.
Slide the compartment back into place.


Set-up and connections

Setting up the device

 Place the device on a sturdy, level surface. Please take note of the safety
instructions on page 8.
Some aggressive furniture paints can corrode the device's rubber feet. If
necessary, place the device on a suitable underlay.
CAUTION!
Before making a connection to an external device, unplug all
devices from the mains.

Attaching the stand

If you want to position the device in an upright position, use the supplied
stand.
Place the device onto the stand with the four hooks in the

corresponding notches and push the device onto the stand until it
clicks into place.
EN
DE
FR
IT
NL
DK
NO
SE
15