7. Getting started
7.1. Operation using the controls on the device or
remote control
You can activate the main play functions on your audio system using the buttons
on the device. In addition to the basic controls, the remote control also provides nu-
merous other options for using all functions of your device.
In this user manual, we refer to the remote control buttons. If reference is made to
the controls on the device itself, this will be clearly indicated.
7.2. Switching on the device/standby
Press the
button to switch on the device.
Press the
button again to switch the device back into standby mode. The date
and time are displayed.
When the device is switched on for the first time, the device completes the initial
set-up process.
7.3. Initial set-up
Turn the VOLUME OK controller on the device or press the corresponding
navigation buttons on the remote control
guage. Press the
VOLUME OK controller on the device or OK on the remote control to confirm
your selection.
Follow the instructions to agree to the data protection information.
Turn the VOLUME OK controller on the device or press the corresponding
navigation buttons on the remote control
WIZARD START NOW? appears and select YES. Press the VOLUME OK con-
troller on the device or OK on the remote control to confirm your selection and
start the set-up wizard.
If you select NO you can select in the next window whether the wizard
is to start the next time the device is switched on.
7.3.1. Setting the date and time
Turn the VOLUME OK controller on the device or press the corresponding
navigation buttons on the remote control
format (12/24). Press the VOLUME OK controller on the device or OK on the
remote control to confirm your selection.
Turn the VOLUME OK controller on the device or press the corresponding
navigation buttons on the remote control
be updated (DAB, FM, NETWORK, NO UPDATE).
to select the desired lan-
when the prompt SETUP
to select the desired hour
to select how the time is to
DE
FR
NL
ES
IT
EN
263