Appliance Description - SOLIS VAC PREMIUM 574 Mode D'emploi

AP PLIA NC E DE S C R IP T I O N
s
3
5
11
10
12
92
1 2
4
5
6
7
8
9
13
APPLI ANCE DESCR I PTI O N
s
1 Membrane keyboard with function buttons
– you can ind the precise description of the buttons and their function on
page 94 / 95.
2 Appliance cover
– specially coated, so that ingerprints remain invisible.
3 Release buttons
– by pulling up both buttons, the appliance cover is unlocked and can be
opened. CAUTION: Do not press down on the release buttons to close the
appliance, only do so on the front corners of the appliance cover!
4 Rubber contact strip
– the counterpart of the sealing bar which makes sure that the end of the bag
is pressed lat against the sealing bar, to provide an optimal seal.
5 Locking catches
6 Chamber for air extraction hose with inlying hose
– the air extraction hose can be stored close at hand in this narrow chamber.
7 Canister Switch button
– this button must be pressed, in order for lidded containers to be vacuumed
through the air intake tube. CAUTION: Only use the original Solis container
with this appliance.
8 Air extraction opening
– for sucking air out of the vacuum bag resp. for connecting the vacuum hose
for evacuating Solis containers.
9 Vacuum chamber with removable drip tray
– the open end of the bag is placed here so that the air can be extracted from
the bag; the inlying drip tray can be removed for easy cleaning.
10 Sealing bar
– the telon coated bar heats up and seals the end of the bag.
11 Upper and lower seal
– so that the end of the bag is shut airtight, allowing all of the air to be
removed; the lower seal can be removed for cleaning.
12 Power cable in cable compartment
13 Non-slip rubber feet
– to ensure safe footing when the appliance is operating.
93