Weighing; Weighing Units - Adam Equipment CORE Série Mode D'emploi

EN
3.3 WEIGHING
To determine the weight of a sample, first tare an empty container (if used), then
place the sample in the container. The display will show the weight and the unit of
weight currently in use. The stable indicator will light up when the reading is stable.
3.4 WEIGHING
To change the weighing units, press [Unit] to cycle through the available units.
See the Parameter section to enable or disable the weighing units. Once the unit has
been selected, the weight will be displayed in the selected unit and a symbol for the
weight will be shown.
© Adam Equipment 2016
UNITS
9 308669539revB6-Mar17