Unpacking The Scale; Setting Up The Scale - Adam Equipment AELP Notice Utilisation

3.0 UNPACKING THE SCALE

• Remove the 2 sets of pallet beams using the handles provided.
• Take care while removing the beams to avoid banging or injury.
• Remove the Indicator and the power supply adapter packed seperately.
• Place it on a levelled and firm floor.
• Position the beams side by side.

4.0 SETTING UP THE SCALE

• Plug in the Indicator into the socket provided at the back of the
pallet beam (the one having two sockets).
• Ensure both the beams are connected via the beam-to-beam
cable.
• Attach the Power Supply adapter to the Indicator and switch the
main supply to ON.
• The Indicator can also be operated by using 6 x AA size
batteries. (Alkaline batteries suggested).
• Read this User Manual before starting the weighing operation.
•
Place the pallets on the beams for weighing.
© Adam Equipment Company 2005
5