English; Introduction; Setting Up - Adam Equipment TBB - TRIPLE BEAM Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

ENGLISH

1.1

INTRODUCTION

The TBB 610S, TBB 2610S and TBB 2610T are Single Pan Balances of unequal arm type with 3
beams. They are often referred to as Triple Beam Balances. The TBB 2610S and TBB 2610T
models are supplied with counter-weights (3) for weighing up to a maximum capacity of 2610 g.
The TBB 610S is identical to the TBB 2610S but without the counter weights or legs. The TBB
2610T has an additional counter-weight beam for Tare of up to 225 grams in addition to weighing
up to 2610 grams.
1.2

SETTING UP

Unpack carefully. The TBB 2610S and TBB 2610T balance consists of the main body and 3
auxiliary counter weights (2 each for 1kg loads, 1 for 500g load). Note that the counter
weights are not 1kg or 500g masses -they are used only to balance this amount of mass.
Place on a firm, level surface away from fans or open windows. Remove the rubber bumper
from under the pan support. Slide all the weights to the left. Make sure the 2 largest
weights fit into the notches on their beams. The front weight should point to zero.
To lock the TBB down using the optional Security lock, insert the locking mechanism into
the hole marked on the base of the TBB model. Follow the instructions supplied with the
lock and wrap the cable around a fixed object. Make sure the cable does not hit the beams
or the hanging weights.
Check the zero. The pointer on the right end of the beam should align with the zero mark.
Adjust the thumb screw on the left end of the beam, if necessary.
Capacity
Tare
Readability
Beam Calibration:
Damping
Ruler
Lock Down Device
Density Determination
Pan Size
Overall Size (w x h x d)
Net weight
@Adam Equipment Company 2015
2610 grams with counter weights
610 grams without counter weights
+225 g on TBB 2610T only
0.1 g
Beam
Range
Front
0-10 g
Beam
2
nd
Beam
0-500 g
rd
3
Beam
0-100 g
Magnetic
Inches ( " ) & centimetres (cm)
Uses Security Lock
152 mm (6") diameter
Stainless Steel
505 x 110 x 160 mm
(20" x 4.3" x 6.3")
2.7 kg (5.94 lb.)
2
P.N. 8141, RevD Nov2015
Increment
0.1 g
100 g
10 g
English

Publicité

Table des Matières
loading

Table des Matières