Door Reversibility - FUST NOVAMATIC KS162-IB Notice D'utilisation

51
be positioned below overhanging wall units.
Accurate levelling is ensured by one or
more adjustable feet at the base of the
cabinet.
100 mm
15 mm

Door reversibility

WARNING! Before carrying out
any operations, remove the plug
from the power socket.
CAUTION! To carry out the
following operations, we
suggest that this be made with
another person that will keep a
firm hold on the doors of the
appliance during the operations.
1. Tilt back the appliance carefully so that
the compressor cannot touch the floor.
2. Unscrew both adjustable feet.
3. Unscrew the screws of the door bottom
hinge.
4. Take off the appliance door by pulling it
slightly downwards.
5. Unscrew the top door hinge pin of the
appliance then screw it back on the
other side.
15 mm
6. Fit the appliance door on the upper
door hinge pin.
7. Remove the lower hinge. Put over the
pin in the direction of the arrow.
8. Unscrew and install the screw on the
opposite side.
9. Install the lower hinge on the opposite
side leaving the position of the door
unchanged.
10. Screw in the one screw in the place set
free on the other side as well as the
adjustable feet (2 pieces).
11. Remove and install the handle on the
opposite side.
4
2
1
CAUTION! Reposition, level the
appliance, wait for at least four
hours and then connect it to the
power socket.
1
2
3