Freezing; Variable Inner Door; Defrosting - FUST Novamatic EK 716.6-IB Mode D'emploi

Freezing

Only fresh produce is suitable for free-
I
zing.
Only small quantities should be frozen at
I
one time so that the temperature in the
freezer does not increase too much
(max. 2kg).
Leave the temperature control in the
I
normal operating position. The electro-
nics sense that products need to be fro-
zen and the process control is carried out
automatically.
Products for freezing should not be
I
brought into contact with products
which are already frozen. Products which
have been thawed out must not be re-
frozen because foodstuffs can spoil.
Variable inner doors
The cover inserts in the inner doors can be
adjusted somewhat and offer the option of
a customized setting. To change the location
of the inserts and bottle holder: first lift
(fig. %).
upwards and lift out, then set the required
height and replace in the reverse sequence.

Defrosting

The refrigerator defrosts automatically. Ice
which has formed on the back wall is mel-
nel (fig. &) and evaporates from the collec-
ted (about once per day, see also the tips).
The water flows out of the drainage chan-
tion dish outside the refrigerator.
Be sure to keep the collection channel and
the drainage channel clean, so that the
melted water can flow out easily. Clean
out the drainage channel with the green
cleaner provided using an up-and-down
and turning motion.
36
=
%
&
Defrost the freezer compartment if the ice
formation becomes excessive. A thick coa-
ting of ice reduces the effectiveness of the
cold transfer to the frozen products. Keep
the frozen products as cold as possible and
well insulated during the defrosting time,
e.g. pack them in newspaper.