Replacement parts/Accessories
Spare parts and accessories can be obtained at
If you do not have internet access, please contact the Service Centre. Please have the
Battery ...............................................................................................................80001176
Quick charger ......................... ....................................................................... .80001097
The Oregon replacement saw chain is to be used only in conjunction with
the associated Oregon blade and the chainsaw approved for this. There is
a risk of injury.
Trouble shooting
Problem
Gerät startet nicht
Chain does not rotate
Inferior cutting perfor-
mance
Saw runs with difficul-
ty, chain comes off
Chain becomes hot,
smoke development
during sawing, discol-
oration of the rail
Display on the de-
vice flashes - alarm
sounds
www.grizzly-service.eu
order number mentioned below ready.
Possible cause
The battery (
19) is empty
or not inserted
Defective On/Off switch
(
10)
Worn carbon brushes
Defective motor
Chain brake blocks saw chain
(
5)
Incorrectly mounted saw
chain (
5)
Saw chain (
5) blunt
Chain tension insufficient
Chain tension insufficient
Too little chain oil
Saw chain blocked by objects
Fault correction
Check the charge level, and have
repairs carried out by a qualified
electrician, if necessary.
Repair by customer service
Repair by customer service
Repair by customer service
Check chain brake.
Possibly release chain brake
Mount saw chain correctly
Sharpen cutting teeth or place on
new chain
Check chain tension
Check chain tension
Check oil level and, where appro-
priate, refill with chain oil,
check oil automatic system and,
where appropriate, clean oil out-
flow duct or have repaired by cus-
tomer service
Switch off und remove the battery.
Remove objects
GB
111