Safety Instructions - Ribimex Ribiland PRBVB2800 Manuel D'instructions Et D'utilisation

III. SAFETY INSTRUCTIONS
Before using this product, carefully read and understand all the safety recommendations
and instructions for safe operation.
Failure to follow all instructions listed below may result in electric shock, fire and/or
serious injury.
Keep this manual handy so that you may refer to it later whenever any questions arise.
Always be sure to include this manual when selling, lending, or otherwise transferring the
ownership of this product.
WARNING! This product should only be used by experienced users, who have
thoroughly read this instruction manual.
Only persons who have received adequate instructions should use the product.
Never allow children, persons with reduced physical, sensory or mental capabilities or
lack of experience and knowledge or people unfamiliar with these instructions to use the
machine.
Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by children.
Never allow children or persons unfamiliar with these instructions to use the product
3.1- Explanation of Symbols
Do not expose to weather conditions (ex.: rain, snow ...) or to moisture.
Do not use nor leave outdoor during weather conditions (e.g. rain, snow...)
Do not use in the rain or leave outdoors while it is raining.
Caution! Risk of injury and/or damage and/or deterioration of product in case on
non-compliance to safety requirements.
Read the instructions manual.
Class II product with double or reinforced insulation
Wear eye protection.
Wear ear protection.
The machine may exceed 85 dB(A) at the workplace; in this case, noise protection
measures need to be taken to protect the user.
Wear protective gloves and shoes with non-slippery sole.
Keep all parts of your body away from moving parts and from the shredder opening.
Rotating cutting knife. Keep hands and feet away from the openings while tool is
running.
Do not step on the collection box.
Keep persons (esp. children) and animals away from product and working area.
Projection hazard (e.g. small debris).
Keep bystanders at a safe distance (at least 3m) away from the tool while in
operation.
Let moving parts come to a standstill before carrying any intervention on machine.
Locked and unlocked position
Page 15 / 35