Maintenance And Storage - Ribimex Ribiland PRBVB2800 Manuel D'instructions Et D'utilisation

5.2.5- Replacing the counter plate
1. Open the back cover by loosening the 4 Screws (A).
2. Take out the counter plate (B) and replace with a new one.
3. Put back the back cover and tighten the 4 screws.
VI. MAINTENANCE AND STORAGE
Before any intervention on product, ensure that product is disconnected from its power source.
Reminder: Make sure to maintain the machine in good working condition, carry out regular maintenance of the
machine after each use and before storage .Any breach or default of adequate maintenance reduces the life of the
machine and increases the risk of breakdowns and accidents.
To preserve the security system throughout the life of the machine, it is important to perform maintenance and proper
cleaning, DO NOT use non‐compliant replacement parts and do NOT dismantle yourself the machine or change the
security features.
6.1- After using the machine
1) Empty the collection box.
2) Check the machine (feeding inlet and chute) and remove material residue.
6.2- Cleaning
Clean plastic parts with a soft and clean cloth
Do not use aggressive cleansers (solvents or abrasive cleansers), or an abrasive sponge.
Do not use any caustic to clean the plastic parts.
Do not put or immerse machine in water or any other liquid, and ensure that no water gets inside the
machine. Do not clean the machine with running water or high pressure
Page 23 / 35