Components; Correct Use; General Safety Instructions For Handling Power Tools - Meister CRAFT MWS 2400 Traduction Du Manuel D'utilisation Original

5455380-Winkleschl-man 05.04.13 13:16 Seite 33
The specified vibration emission value
can also be used for preliminary
evaluation of the disturbance.
CAUTION! The vibration emission
value may fluctuate from the
specified value during use of the
electrical tool. These fluctuations will
depend on the way in which the tool is
used.
Safety measures must be taken in
order to protect the operator. As a
result, the evaluation of the
disturbance must be made whilst
taking account of the actual conditions
of use. (All parts of the operating cycle
must be taken into account for this
purpose. This also includes times in
which the tool is switched off and
times in which it is switched on, but is
running without load.)
3 – Components
1 Starting and stopping device
2 Additional grip
3 Disc cover for cutting discs
4 Spindle-lock button
5 Flange spanner
6 Spindle with joining thread
7 Clamping disk
8 Clamping nut
9 Handle
10 Guard
11 Ring bead (fig. 2)
12 Screw
13 Control LED
14 Spare carbon brushes
15 Disc cover for roughing discs
4 – Correct use
For cutting, grinding, rough grinding and
cleaning metals, stone and ceramic
materials with suitable accessories. Use
the machine and accessories (observe
manufacturer's instructions) only for
their intended applications. All other
applications are expressly excluded.
The machine is intended for rough-
grinding, cleaning and cutting stone and
metal in lengthwise or crosswise
directions. Light objects should only be
cut or ground when they are correctly
secured to prevent them from slipping
or flying away. The machine must not be
used for any other purpose.
The machine is intended only for hand-
held (not fixed) use in the household.
The machine is not suitable for cutting
wet materials.
CAUTION! Incorrect use of, or
alterations to the drill, as well as
the use of parts not tested and
approved by the manufacturer, may
cause unforeseen damage.
5 – General safety
instructions for handling
power tools
WARNING! Read all safety
warnings and all instructions.
Failure to follow the warnings and
instructions may result in electric shock,
fire and/or serious injury.
Save all warnings and instructions for
future reference.
The term "power tool" in the warnings
refers to your mains operated (corded)
power tool or battery-operated
(cordless) power tool.
This unit may not be used by people
(including children) with reduced
physical, sensory or mental capacities,
with a lack of experience and without
33