General Safety Instructions - Meister WS500-115M Mode D'emploi

The user of the device must ensure
sufficient protective equipment during
use in accordance with the operating
instructions and the warning pictograms
applied to the tool. Prior to each use
and during the use of the tool, the tool
and the disc should be checked for any
electrical or mechanical damages.
If damage to the unit is determined, stop
work and contact a specialist workshop.
The machine is intended only for hand-
held (not fixed) use in the household.
The machine is not suitable for cutting
wet materials.
CAUTION! Incorrect use of, or
alterations to the drill, as well as
the use of parts not tested and
approved by the manufacturer, may
cause unforeseen damage.
Improper use
All applications carried out with the
device that are not listed in the „Proper
use" chapter will be considered improp-
er use.
The unit may not be used for the follow-
ing purposes:
• Processing of materials other than
those listed in the Proper use
section,
• Use with a saw blade,
• Use as a stationary unit,
• As a drive for other units.
There is a risk of injury.
The user of the device is liable for all
property and personal damages occur-
ring as the result of incorrect
use.
5405070-Winkelschleifer-man.indd 51 5405070-Winkelschleifer-man.indd 51
If other components or non-original
components are used with the machine,
the manufacturer guarantee is voided.
Remaining risks
Even when the device is used proper-
ly, there is a residual risk that cannot be
excluded. The following potential dan-
gers are inherent in the type and con-
struction of the device:
• Contact with the unprotected area of
the grinding wheel
• Reaching into the grinding wheel
whilst it is still rotating
• Parts of the grinding wheel and other
parts flying out
• Damage to the hearing if the prescribed
ear defenders are not worn,
• Breathing in dust,
• Electrical shock when touching
non-insulated electrical components.
If the instructions in your operating
instructions are not observed, incorrect
use may result in other residual risks.
5 – General safety instructions
for handling power tools
I. General safety information
WARNING! Read all safety
warnings and all instructions.
Failure to follow the warnings and
instructions may result in electric shock,
fire and/or serious injury.
Save all warnings and instructions for
future reference.
The term "power tool" in the warnings
refers to your mains operated (corded)
power tool or battery-operated (cord-
less) power tool.
51
22.10.20 10:52 22.10.20 10:52